Suppliers with verified business licenses
Audited Supplier 
Second hand caterpillar 140H motor grader used Cat Motor Grader USED wheel motor grader CAT 140H
Caterpillar 140H grader parameter configuration
Transmission case
Four gear travel speed (km/h) 44/34.7
Oil filling capacity
Coolant (L) 38
Hydraulic system (L) 80
Fuel tank (L) 397
Specification & size
Minimum ground clearance (mm) 344
Rear wheel wheelbase (mm) 1523
Front and rear axle wheelbase (mm) 6169
Overall height of the machine (mm) 3131
Full width (mm) 2464
Overall length (mm) 8173
The blade to the front wheel distance (mm) 2561
Engine
Displacement (L) 10.3
Engine cylinder number 6
Rated power (kw/rpm) 138/2000
Model Caterpillar Caterpillar 3176CDITAATAACVHP
| Engine | ||
| MAKE | Caterpillar | |
| MODEL | 3176C DITA ATAAC VHP | |
| NET POWER GEAR 3-4 | 185 hp | 138 kw |
| NET POWER GEARS 7-8 | 185 hp | 138 kw |
| MAX POWER | 185 hp | 138 kw |
| DISPLACEMENT | 629 cu in | 10.3 L |
| NET POWER GEAR 1-2 | 165 hp | 123 kw |
| POWER MEASURED @ | 2000 rpm | |
| NET POWER GEAR 5-6 | 185 hp | 138 kw |
| NUMBER OF CYLINDERS | 6 | |
| Operational | ||
| STD OPERATION WEIGHT - TOTAL | 32357 lb | 14677 kg |
| FUEL CAPACITY | 105 gal | 397 L |
| HYDRAUILC SYSTEM FLUID CAPACITY | 20.8 gal | 80 L |
| TIRE SIZE | ||
| OPERATING VOLTAGE | ||
| ALTERNATOR SUPPLIED AMPERAGE | ||
| STD OPERATION WEIGHT - FRONT AXLE | 9123 lb | 4138 kg |
| STD OPERATION WEIGHT - REAR AXLE | 23234 lb | 10539 kg |
| MAX OPERATION WEIGHT - FRONT AXLE | 16733 lb | 7590 kg |
| MAX OPERATION WEIGHT - REAR AXLE | 30139 lb | 13671 kg |
| MAX OPERATION WEIGHT - TOTAL | 46872 lb | 21261 kg |
| COOLING SYSTEM FLUID CAPACITY | 10 gal | 38 L |
| REAR DIFF/FINAL DRIVE FLUID CAPACITY | 12.4 gal | 47 L |
| CIRCLE GEARBOX FLUID CAPACITY | 1.8 gal | 7 L |
| TANDEM CASE FLUID CAPACITY (EACH) | 16.9 gal | 64 L |
| Transmission | ||
| NUMBER OF GEARS - FORWARD | 8 | |
| NUMBER OF GEARS - REVERSE | 6 | |
| MAX SPEED - FORWARD | 27.4 mph | 44 km/h |
| MAX SPEED - REVERSE | 21.6 mph | 34.7 km/h |
| TYPE | direct drive, power shift | |
| Steering | ||
| ARTICULATION L/R | 20 degrees | |
| TURNING RADIUS | 24.6 ft in | 7.5 m |
| Front Axle | ||
| WHEEL LEAN | 18 degrees | |
| OSCILLATION - TOTAL | 32 degrees | |
| GROUND CLEARANCE | 2 ft in | 600 mm |
| Hydraulic System | ||
| PUMP TYPE | axial piston | |
| PUMP FLOW | 54.4 gal/min | 206 L/min |
| RELIEF VALVE PRESSURE | 3500 psi | 24150 kPa |
| Moldboard | ||
| MOLDBOARD WIDTH | 12 ft in | 3658 mm |
| MOLDBOARD HEIGHT | 24 in | 610 mm |
| MOLDBOARD THICKNESS | 0.87 in | 22 mm |
| MAX DEPTH OF CUT | 28.1 in | 715 mm |
| SIDE SHIFT LEFT | 20.6 in | 524 mm |
| SIDE SHIFT RIGHT | 26 in | 660 mm |
| BLADE PULL AT MAX WEIGHT | 42184 lb | 19135 kg |
| BLADE DOWN PRESSURE | 28697.6 lb | 13017 kg |
| Circle | ||
| MAX LIFT ABOVE GROUND | 18.9 in | 480 mm |
| DIAMETER | 60.2 in | 1530 mm |
| SHIFT LEFT | 27.4 in | 695 mm |
| SHIFT RIGHT | 28.7 in | 728 mm |
| MAX REACH OUTSIDE TIRES - LEFT | 74.6 in | 1896 mm |
| MAX REACH OUTSIDE TIRES - RIGHT | 77.9 in | 1978 mm |
| BLADE TIP ANGLE - FRONT | 40 degrees | |
| BLADE TIP ANGLE - REAR | 5 degrees | |
| Dimensions | ||
| HEIGHT TO TOP OF CAB | 10.3 ft in | 3131 mm |
| OVERALL LENGTH | 28.6 ft in | 8713 mm |
| WIDTH OVER TIRES | 8.1 ft in | 2464 mm |
| WHEELBASE | 20.2 ft in | 6169 mm |
| BLADE BASE | 8.4 ft in | 2561 mm |
| TANDEM AXLE WHEELBASE | 5 ft in | 1523 mm |
| REAR GROUND CLEARANCE | 1.1 ft in | 344 mm |
| FRONT GROUND CLEARANCE | 2 ft in | 600 mm |
Q1. Where are your machines currently stocked?
Answer: Our office is located in Shanghai and we have yard in Shanghai ,so
all the machinery located in Shanghai.
Q2. How about the quality of machine?
Answer: All our machines are well-maintenanced and original. Welcome to test the machine on spot.
Q3. Which machines can you supply?
Answer: This is a Shanghai-based machinery company which specializes in exporting used machines,including truck cranes, crawler cranes, forklifts, excavators,wheel loaders, road rollers etc. Most of them were originally from Japan.
Q4. What is your payment?
Answer: Payment is negotiable (TT,western union etc)
Packaging & Shipping:
1.Container: The cheapest and fast one ;put the machine into container need disassemble .
2.Flat rack: Often used to ship two wheel loader,max load-bearing is 35tons.
3.Bulk cargo ship: which is better for bigger construction equipment,no need disassemble.
4.RO RO ship: The machine is driven directly into the ship and does not need to be disassembled.
1.Container: The cheapest and fast one ;put the machine into container need disassemble .
2.Flat rack: Often used to ship two wheel loader,max load-bearing is 35tons.
3.Bulk cargo ship: which is better for bigger construction equipment,no need disassemble.
4.RO RO ship: The machine is driven directly into the ship and does not need to be disassembled.
Our customer:
Our company professionally export all kinds of used construction & engineering machinery for many years, our products including Excavator, Bulldozer, Loader, Crane, Grader, Road roller, Forklift. The brands include Caterpillar, Hitachi, komatsu, Daewoo, Kobelco, Hyundai, Volvo, Kawasaki, KATO, Tadano and so on, we have customers from The Southeast Asia, Africa,The Middle East,The South America,and we are looking for the long and good business relationships with you !
Our service:
Pre-Sales Service
We trust that customer satisfaction is the only benchmark to inspect our works.
1.Airport picking
2.Hotel booking
3.Translating and guiding during your visit in Shanghai
After-Sales Service:
1. Training how to instal the machine, training how to use the machine.
2. Engineers available to service machinery overseas.
Chat Now for Best price!
Please let us know which product are you looking for?
We will recommend the related products to you.
↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}